MPS 自动溶媒制备

样品前处理

品牌

应用

自动溶媒制备加快溶出度测试

SOTAX MPS

溶出溶媒制备

在使用 USP 1、2、4、5 和 6 法进行溶出度测试时，溶媒的制备，即脱气、加热和按实验所需的体积精确添加至溶出杯的步骤，会带来诸多复杂的工作。Sotax MPS (溶媒制备工作站）将这些任务自动化，使用 Sotax 薄膜技术 Thin Film Technology™ 可对溶出介质进行有效的预热和脱气，及快速准确的装填。使用浓缩液可进一步降低溶媒制备时间，取得更高的效率。

溶媒制备过程的所有步骤都是自动控制。提高了溶出测试的可靠性和重现性，特别有利于需要进行许多短期测试或同时使用多个溶出度单元的实验室。

  • 简潔可移动单元，可操作多达20升溶媒，足够3个溶出度测试仪使用，准确度>99.5 %，满足USP要求。

  • 可轻松使用、清洗、观察、编程和验证。

  • 自动控制脱气和调温功能。

  • 高准确度快速输送泵，以1500 mI/min的流速可在约3分钟内填满溶出测试仪

  • 自动控制排空和清洗功能，容器和整体管路及阀系统都被彻底冲洗。系统的开放式结构便于实验人员观察清洗结果

  • 关键数据可显示和打印

  • 内置天平可进行重量自校正选项，自动报告打印，轻松验证

  • 制药工业的研发和质量控制

MPS

Sample Preparation

Brand

Application

Automatic media preparation to speed up dissolution testing

Media Preparation Station for dissolution media

When USP 1, 2, 4, 5 & 6 dissolution tests are carried out, the preparation of the media and its degassing, tempering and accurate metering into the test vessels involves substantial effort. The SOTAX MPS (Media Preparation Station) automates these tasks, permitting the efficient preheating and degassing of the dissolution media using SOTAX Thin Film Technology™, as well as fast and accurate filling. For even greater efficiency, the use of concentrates allows the system to further reduce media preparation time.

All aspects of the media preparation process are automatically controlled. This improves dissolution test reliability and repeatability, and is particularly beneficial in laboratories where many short tests are carried out or where several dissolution units are used.

  • Very compact mobile unit, but able to handle up to 20 litres of media, sufficient for up to three dissolution tests, with >99.5 % accuracy, fulfilling USP requirements
  • Easy to use, clean, observe, program and validate
  • Automatically controlled degassing and temperature-adjusting functions
  • Highly accurate and fast delivery pump with 1,500 mI/min flow rate fills dissolution tester in approximately three minutes
  • Automatically controlled emptying and cleaning function flushes glass vessel and the entire tubing and valve system thoroughly. The system’s open architecture allows for easy visual inspection of the cleaning process
  • Key data shown on display and may be printed
  • Gravimetric self-calibration option with built-in balance and automatic report generation for ease of validation
  • R&D and QC in pharmaceutical industry